Home Photo Gallery Customer Service View Cart Order Status
Suspension Lift Kits
Leveling Kits
Sales & Specials
 
ATV / UTV
Add-a-leafs
Air Compressors
Bed Rail Caps
Blocks & U-Bolts
Body Lift Kits
Brake Lines
Bump Stops
Bumpers
Bushings (poly)
Coil Springs
Differential Protectors
Drive Shafts
Exterior (Steel
Fender Flares
Grill Guards
Handles
Helper Springs (leaf & coil)
Hi-Lift Jack
Jeep Stuff
Ladder/Traction Bars
Leaf Springs
Lights
Limiting Straps
Nerf Bars
Performance Parts
Prerunner
Seats & Seat Covers, Restraints
Shackles
Shocks
Skid Plates
Slip Yoke
Steps (Nerf/Side)
Stabilizers
Storage Bags (Tools, maps, toys, etc.)
Straps (Tie Down, Ratchet)
Superchips
Sway Bar Links/Disconnects
Tailgate Caps
Tire Carrier
Traction Bars
TruSpeed Speed Sensor
U-Bolts
Videos
Winches

07-08 4WD Chevy/GM Pickup Suspension Kits

CST

Fabtech Revtek Rancho RCD Rough Country

Skyjacker

Superlift TrailMaster Tuff Country

Click part numbers to see lowest price in cart!

07-08 4WD Silverado 1500 CST Lift Kit

Most 2007 models come equipped with GM's Stabilitrack system. This has made it difficult to design a system that does not activate the system when driving around corners or out-of-angle driveways. The CST lift has no Stabilitrack issues. This means no lights turning on the dash or the anti-lock system kicking on causing a vibration under your foot. 

Another key feature is the factory track width remains exactly the way it came out of the factory if you use 5" to 5.5" back space wheels. Currently, CST says this is the only lift available with no track width adjustment over factory in the suspension which also means no CV spacers and no tires sticking out of the fender well

Kit components include CST one piece sub-frame with differential skid plate, fabricated lift spindle uprights, upper control arms with high misalignment ball joints, front brake lines, front coil-over spacers, sway bar drop mounts, differential drop mounts and rear 2" blocks & u-bolts. This kit will require 2 rear shocks only (sold separately.

Recommended tire size is a 33" tall tire on 8" wheels. It will be best to run a 5" back space wheel if available. Larger diameter tires may fit but recommend pre-fitment check & trimming may be required.

  • Track width remains factory
  • High quality gloss black powder coat finish
  • Constructed of 3/16 and 1/4" steel and DOM tubing
  • Front differential skid plate
  • Includes heavy duty ball joints
  • Ability to be put back to stock
07-08 4WD 1500 SILVERADO COMPLETE KIT 
(SHOCKS SOLD SEPARATELY)  
Part #

Price

4" Lift Kit  (SEE *1,2 BELOW) CSS-C3-13 $1,999.95
INDIVIDUAL KIT ITEMS & KIT OPTIONS
CST Performance Monotube Shock (Rear for 4" lift) Order 2 CSR-2300 $99.95
*1 Wheels must not have more than 5.5" backspace for use w/ aftermarket wheel or oversized tire application. Most wheels with 5.5" back space work, but wheels should be checked for clearance & fitment before installation.
*2 Brake lines must be changed by a professional. Allowing air into the brake system without proper bleeding could result in brake failure.

Back to Top



07-08 Chevrolet/GMC Silverado/Sierra 1500 4WD
6" Suspension System with SSV shocks

  • True 6" suspension system for the 2007-08 Silverado/Sierra (not the 2007 Classic)
  • CNC machined ductile iron cast steering knuckles
  • Precise laser cut cross members and brackets for quality and consistent fitment
  • Complete rear cross member compression struts for added strength and stability
  • Retains factory steering geometry
  • Independent front and rear cross members linked together with lateral struts and differential skid plate rigidity and ease of installation
  • Will work with stabilitrak
  • Sold with replacement front SSV struts along with new SSV rear shocks for a complete matched system
  • Maximum tire size: 315/70/17 (35”)


6" TrailMaster lift kit 

SSV Shocks Included Part # Price
6" 07-08 4WD Silverado/Sierra 1500  C4721SSV $1,958

Back to Top

Rough Country 3" lift includes front strut spacers, driver and passenger side diff drop brackets, upper control arms, new upper ball joints, differential skid plate, rear 1-1/2" blocks, u-bolts, rear Nitro 9000 shock absorbers, and all hardware Recommend 285/75/17

100% bolt-on installation.
Can be returned to stock.
Increased ground clearance
Levels front of the vehicle with the rear.
No strut disassembly or strut compressor required for installation.

 

07-08 4WD GM 1500 Part # Price
 3" kit w/strut spacers 277S $429


07-08 GM 1500 with 3" kit

HK_277kit.jpg (22654 bytes)
277S, Click to enlarge

Back to Top

2007 4WD Silverado, Sierra K1500 Lift Kit

Superlift's 1.25" lift kit utilizes a machined ring inserted below the factory shocks' coil spring.  If the vehicle is equipped with the factory Autoride electronic shock option, the preload ring lift method allows you to retain the factory shocks. 

The 2" kit involves installing the factory coil springs onto new Superlift coilover shock bodies.  Our lifetime warranted premium gas shocks feature 50mm diameter bodies with 14mm rods.  The high pressure gas monotube design is valved slightly firmer than factory shocks to reduce the spongy factory ride.

Superlift's 6" lift system was modeled using the most current computer design software allowing their engineers to tweak each new component for optimum performance. Superlift's replacement knuckle system installs quick and easy, plus the vehicle can be returned to stock later if desired.

The stock upper control arms remain in their factory location, while crossmembers relocate the lower control arms downward 5". New cast ductile iron knuckles span the increased vertical distance between the upper and lower arms. Superlift's knuckles yield the best possible alignment specifications - they maintain zero degrees of additional camber and toe angle change throughout the suspension travel cycle. This produces rock solid drivability traits, plus this knuckle design accepts the factory spare tire and wheel.

A new differential skid plate connects and strengthens the front / rear crossmembers wile protecting the 4WD front axle's center section. Kicker braces, with urethane bushed eyes, span from the rear crossmember back to the frame to increase rigidity.


2007 Silverado with Superlift 6" lift kit
with 35x12.50 tires on 17x8.5 rims with 5.5" BS

07-PICKUP_12TON-K6.jpg (25128 bytes)
6" Kit
SL_K896_3D.jpg (21931 bytes)
Installed

Click Photos to enlarge

Beefy lower control arm crossmembers, and the remainder of each system's load-bearing bracketry, are laser cut from 1/4" thick plate steel. The front differential is lowered a full 4" to reduce CV axle angle and premature axle component wear. Additionally, the front differential's structural integrity is not compromised since no cutting is required. The factory front drive shaft is retained.

Three different options are offered for the rear shocks, Superide, Bilstein and SSR Remote.

6" Kits will not work with factory electronic shocks or on Denali or Escalade models. Kit will work with Stabilitrak.

1.25" Front Lift allows 32x12.50 
2" Front Lift allows 33x12.50
6" allows 33x12.50x17 with 5.5" BS

SL_3450.jpg (17268 bytes)
3450
SL_3451.jpg (12780 bytes)
3451

Click photos to enlarge

07-08 4WD Silverado/Sierra except Denali and Escalade Part # Price
1.25" kit with or without factory electronic shocks 3450 $45
2" kit without factory electronic shocks 3451 $211
Rear Coil Spacer 3/4" Lift 3453 $42
07-08 4WD Silverado/Sierra except Denali and Escalade Superide Shocks Price Bilstein Shocks Price SSR Shocks Price
6" Coilover Kit  * K912 $1,578 K912B $1,686 K912R $1,853
6" Coil Spacer Kit * K913 $1,504 K913B $1,611 K913R $1,779
6" Kits will not work with factory electronic shocks
Stainless Steel Skid Plate 3490 $216

Back to Top

Skyjacker's 2" Leveling Kit includes aluminum spacers that go on top of the strut.  This makes for a simple installation as the factory struts do not need to be taken apart.

3" Kit for the Chevy / GMC K-1500
Skyjacker's kit  maintains the factory comfortable ride and structural integrity of the stock drive train. The kit includes front adjustable struts and rear blocks. The extra strong CNC machined knuckles are also at the heart of this design. The heavy-duty bracketry, crossmember, and other components have the strength and durability you expect from Skyjacker. 

6" Kit for the Avalanche/SUV
Skyjacker's 6" kit also maintains the factory ride and stock drive train. The kit includes a CV axle spacer for proper plunge depth of CV joint, front replacement strut assembly with 3 adjustable height positions, extra strong CNC Machined Steering Knuckles, factory style front sway bar endlink assembly, and adjustable front anti-torque rod for minimization of front axle pinion wrap.  Additional benefits of the Skyjacker kit are no cutting of upper differential mount, no cutting of tie rod assembly and no driveshaft modifications. Rear shocks sold separately. 

Info for the 3" Autoride model coming soon!

SK_C7361ARK.jpg (15860 bytes)
3" Autoride model kit 


2" Spacer max tire/wheel size 285/70/17
 with OEM/stock backspacing


3" Kit max tire/wheel size 285/75/16 
with 4.5" backspacing


6" Kit max tire/wheel size 315/75/16 
with 4.5" backspacing

07 K1500 4WD -- Will work with Stabilitrak Part #

Price

 2" Aluminum Leveling Kit C720MS $129.95
 3-3.5" Kit w/ rear blocks non Autoride models only C7361PK $1,327
3" Kit Autoride models only C7361ARK $1,609
 6" Kit w/ rear blocks non Autoride models only C7661PK $1,597
 6" System w/ rear springs non Autoride models only C7661PKS $2,134

Back to Top

07-08 4WD GM 1500 6-7" 

Front end re-alignment is necessary. Speedometer recalibration is necessary if larger tires (10% more than stock diameter) are installed. System utilizes front strut and spring preload assembly spacers for 7" of increased ride height. Extended length monotube replacement struts will be available as an upgrade in the future, call for details. Clears up to 35x12.50 tires mounted on a 17x9 wheel with 4.5" backspacing, fender/ bumper/ valance trimming required. It is recommended to maintain the minimum factory wheel diameter. Trimming of valance/ bumper/ fender will be required with amount depending on wheel fitment and/or specific tire selection. Factory type front end disassembly tools are required for installation. Kit is designed to work with Stabilitrac. Stabilitrac may become more sensitive than stock on a lifted vehicle. Some vehicles may require manual disengagement of Stabilitrac in certain conditions. System includes extended length high performance steel braided brakelines. Brake system bleeding will be required. System Features (2) Rear Zinc Plated Bilstein 5100 Series High Performance Mono-Tube Shock Absorbers. Drive shaft modifications not required.

 


07-08 GM 1500 w/ 6" RCD lift kit, 35x12.50's on 17x9 
wheels with 4.5" back spacing (trimming required)

Note: New Year Model OEM Chassis Applications are subject to change without notice. Special caution and vehicle inspection should be taken when installing products on brand new year models. RCD Suspension cannot be responsible for these changes mid year by the OEM's and/or improper installation. Call RCD Tech for up to date installation information. (619) 588-4723

07-08 GM 1500 Pickup with 5100 Series Bilstein Shocks 

Part #

Price
6" - 7" kit 10-41407 $2,000


Back to Top



Rancho introduces the industry's first suspension system for the 2007 Silverado/Sierra. The totally re-engineered Silverado/Sierra Pickup incorporates a new coil-over IFS design. Rancho's exclusive replacement front coil over shock absorbers eliminates the need to use spacers.  This uncompromising design provides enhanced off-road performance and untouchable ride quality. 

Underneath the front end is Rancho's signature one-piece sub-frame.  Constructed from laser cut 1/4" steel the sub frame's components are welded to provide a precise fit and superior strength. Steering integrity is uncompromised by maintaining the stock location of the factory rack and pinion steering. This, along with new extended cast steering knuckles, maintains optimal steering geometry and results in a faster, easier installation. Combined, these features allow for the reuse of the stock wheels and fits up to a 315/70/17 tire with 5.5" backspacing.

After receiving reports on increased sensitivity in GM's StabiliTrak system Rancho revised all their kits to include new steering knuckles and replacement tie-rod ends which better accommodate the StabiliTrak system.

Fitment of the maximum tire diameter may require trimming or modification to provide proper clearance. Wheels under 17" in diameter cannot be used.

Additional features:

  • Front differential drop brackets correct pinion angle for minimized driveline vibration
  • No drivetrain or exhaust modifications necessary
  • Maintains factory location of rack & pinion
  • Preserves OE geometry for easy alignment, minimized bump steer and optimal ride and handling
  • High-clearance aft braces for added strength while maximizing ground clearance. 
  • New extended length DOT front brake lines


2007 4" Rancho lift kit

RS6563.jpg (28407 bytes)
RS6563 components - enlarge

Multiple Shock Kits

Front Coil Over Shocks not included in lift  Part # Price
RS9000X Front Coil Over Shock Absorber (order 2) RS999786 $191.99
Rear Shocks ordered separately Part # Price
4" 2007 4WD Silverado/Sierra 1/2 ton w/ Automatic Transmission Except AWD and Autoride RS6583B $1,499
Front skid plate  R8716B $277
Lower differential skid plate  RS6201 $144

Back to Top

07-08 4WD Silverado/Sierra 1500

Features of the 2" leveling kit are as follows: 

  • No cutting or welding necessary and easy, bolt-on installation

  • Super, heavy-duty, plated and powder coated components

  • Manufactured utilizing OEM or better materials for strength and durability

  • Cast aluminum construction for long term durability and good looks

  •  New shocks are not required

The 6" lift is designed to deliver excellent on and off road performance. 

  • CNC machined ductile iron cast steering knuckles

  • Precise laser cut cross members and brackets for quality and consistent fit

  • Complete rear cross member compression struts for added strength and stability

  • Retains factory steering geometry

  • Independent front and rear cross members linked together w/ differential skid plate rigidity and ease of installation

Will work with Stabilitrak Part  # Price
2" Front spacer lift 315 $111
6" Kit with shocks 316 $1,857


2" Leveling Kit fits up to 33x12.50 tires on stock rims


6" Kit allows 35x17 w/ 4.5" BS or 35x20 w/ 5 3/4" BS


Kit 315 - click to enlarge

RV_316kit.jpg (33736 bytes)
Kit 316 - click to enlarge

Back to Top

For those consumers that do not like the "nose down" look Tuff Country EZ-Ride Suspension's 2007-08 Chevy Silverado leveling kit is designed to easily and safely level the front of your truck. Using coil spring / strut spacers that are mounted above the factory coil / struts this kit maintains a near factory ride by not adding any additional pre-load on the struts. Will also allow for slightly larger tires (285/70R). Includes two coil / strut spacers and required hardware.

2007 4" Lift Features: 
Tuff Country's lift is designed to give unmatched strength, durability and allow for a quicker installation. This highly engineered lift kit uses a sub frame system consisting of two cross members that are connected by a heavy duty skid plate. Factory front struts can be retained through the use of the unique strut spacers, which allows for a near factory ride and reduced costs. 3" cast iron blocks lift the rear to level the Chevy Silverado. 

  • Factory front struts can be retained 
  • New steering knuckles eliminate need to drop upper control arms

  • Includes heavy duty front skid plate

  • Multi piece sub-frame allows for easier installation

  • Maintains a near factory ride

  • Will not work with Stabilitrak or Traction Control Models


07 Chevy 4" kit - Allows use of 33" x 12.5" tires


2" Spacers - only fits models with front struts


TC_14055kit.jpg (19232 bytes)
4" kit components - click to enlarge

Rear Shocks purchased separately   Part # Price
2" aluminum spacers 12000 $123
4" 07-08 Silverado K1500 
(Will not work with Stabilitrac)
14055 $1,668

Back to Top



New 6" Basic and Performance Systems

The 2007-08 GM/Chevy system incorporates Fabtech's leading crossmember and spindle technology.  Fabtech pushes the envelope with superior ride height to properly clear a 35" tall tire.  Extensive design work was given to the extended length steering knuckles to keep the track width near stock with superior turning radius for maneuverability in tight spots.  Lower control arm crossmembers are strengthened with cross tubes backed up by tubular frame struts to distribute front suspension impact loads.  The front differential is protected with a tightly formed 1/4" thick steel skid plate.  Rear suspension lift is accomplished via a block and add-a-leaf.  

The Basic System features the above mentioned components along with a front coilover spacer system utilizing the factory coilover assembly for a stock like ride.  

Rack and pinion is retained in a stock position.  There are no brake line or driveline modifications required for installation. Recommend 35x12.50R17 with 17x8 with 5" backspacing. 


2007 Chevy with 6" Fabtech lift kit, 35x12.50R17 tires on 17x8 rims with 5" backspacing. 

 

FT_K1025D.jpg (36226 bytes)
6" Performance
FT_K1024.jpg (34302 bytes)
6" Basic


Fabtech's Performance System provides the Dirt Logic 2.5 coilover front shocks for superior damping.  Rear shock options with this system include Dirt Logic 2.25 Non Resi Shocks for a total suspension upgrade. This system will provide a supple highway ride with outstanding offroad capabilities for the best of both worlds.

07-08 4WD GM K1500  
Will work with Stabilitrak
Part #

Price

2" Torsion Key Leveling System FTS21039 $130
6" Basic system 

K1024

$1,858

6" Performance w/ Dirt Logic 2.5 

K1025D

$3,187

6" Performance w/ Dirt Logic 4.0 Coilovers 

K1026D

$3,726

Back to Top


Copyright 2008-2009, Rocky Mountain Suspension Products
For Orders or information, call
1-800-521-4908