Hi-Lift Jack

When it's a heavy-duty situation, the tool had better be a Hi-Lift!

HI-LIFT JACK

With over 100 years of quality, the Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to maneuver, the Hi-Lift Jack offers a rated capacity of 4,660 lbs (2114 kg) and a tested capacity of 7,000 lbs (3175 kg).

Only Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load.

Our jacks are designed to help you survive in the most demanding situations – whether you are in the Moab desert canyons, the Welsh Mountains, the Amazon jungle, or the farmlands of Indiana. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading/farm/auto recovery equipment you can buy.

Hi-Lift Jack Specifications

Approximate weight: 30lbs (14 kg)
4,660 lbs (2113.74 kg) rated capacity
Tested capacity 7,000 lbs.
Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
Steel handle of 14 gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1-5/16" diameter x 30" long.

Hi-Lift Jack Features

Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
For speedy disengaging, lifting unit automatically drops away when load is removed.
4 1/2" (11cm) long lifting nose for positive contact with load.
Steel bar can be reversed for extra long life.
Low pickup of 4.5" (11cm).
28 square inch base plate.

All Cast Hi-Lift Jack --The Hi-Lift Jack Company offers the only all-cast jack manufactured in the world today. Our casting jack is manufactured from high yield and tensile strength iron castings, the same durable metal that we have used for over 100 years. 7000lb (3175.14kg) Tested Capacity

Size

Min. lift Height

Max. lift Height

Overall Height

Winching cap. in lbs

Clamping cap. in lbs

Part #

Price

42" All Cast

4.5"

34"

46"

5,000

750

HL-425

$70.50

48" All Cast

4.5"

38.63"

50.75"

5,000

750

HL-485

$71.00

60" All Cast

4.5"

49.75"

61.75"

5,000

750

HL-605

$72.50

Cast & Steel Hi-Lift Jack -- The cast and steel jack is exactly the same as the all-cast jack except that it has 4 stamped high-strength steel parts. We stamp and form the parts in-house; that allows us to offer the jack at a lower price, yet we still maintain the rigid quality standards that every Hi-Lift product must meet. 7000lb (3175.14kg) Tested Capacity.

Size

Min. lift Height

Max. lift Height

Overall Height

Winching cap. in lbs

Clamping cap. in lbs

Part #

Price

36" Cast/Steel

4.5"

27"

41"

5,000

750

HL-364

$63.00

42" Cast/Steel

4.5"

32"

43.5"

5,000

750

HL-424

$63.50

48" Cast/Steel

4.5"

37.24"

48.75"

5,000

750

HL-484

$64.00

60" Cast/Steel

4.5"

48.25"

59.25"

5,000

750

HL-604

$65.75

X-Treme Hi-Lift Jack -- The Hi-Lift® X-TREME is for the serious Hi-Lift® user, offering the "top of the line" all-cast version with special features that include, charcoal metallic powder-coat finish, gold zinc-coated hardware and handle, and a special top winch-clamp-spreader attachment.

Charcoal Metallic Powder-Coat Finish provides a truly unique look that separates it from the standard Hi-Lift.

Gold Zinc-Coat Hardware ensures the greatest rust resistance from extreme use for all the hardware, the unique winch-clamp-spreader attachment, and the handle.

Unique Winch-Clamp-Spreader Attachment replaces the clamp-clevis of standard Hi-Lift®

Winch, clamp, or spread up to 5,000 lbs.
One position for all winching, clamping, and spreading positions.

Size

Min. lift Height

Max. lift Height

Overall Height

Winching cap. in lbs

Clamping cap. in lbs

Part #

Price

48" X-treme

4.5"

38.63"

50.75

5,000

XT-485

$95.75

60" X-treme

4.5"

48.75"

61.75"

5,000

XT-605

$98.50

Hi-Lift Jack Accessories
	Accessory	Part #	Price
	Handle-All - The Handle-All is a multi-functional tool consisting of a telescoping handle and 4 full-size implements. Compact and rugged, while maintaining full-size utility. Perfect for camping, off-roading, recreation, farming, ranching, and forestry. Stores compactly alongside other accessories. When driving off-road, it is essential to have recovery equipment. Most reliable sources strongly suggest a Hi-Lift Jack, a shovel, and an axe as minimal gear. In fact, many off-road parks consider these items mandatory equipment. Storage space for supplies, equipment, and tools is very limited in most off-road vehicles. By reducing the physical size of the tools, storage and transportation becomes easier... while maintaining functionality. Includes telescoping handle, shovel, sledge hammer, axe, pic-axe, and Branded Hi-Lift gear bag to store handle and implements.	HA-500	$126.00
	Lift Mate -- Lift Directly from the Wheel - Plastic Bumpers and Extreme Lift-Kits Are No Longer a Problem. Many trucks and SUV's have larger tires and/or lift kits that require extensive lifting height ability from the bumper jack. The Lift-Mate is designed to operate in a manner that allows the vehicle wheel to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar needed to lift the wheel in an adequate and safe height. Lift Capacity: 5000 lbs. (2273 kg) Rubber-Coated hooks to protect the wheel Rubber pad for protecting the tire and wheel	LM-100	$30.00
	Off-Road Kit -- Use the Off-Road Kit to turn your Hi-Lift Jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms reach. Winch tensioner, custom nose attachment, 8 ft. tree saver strap, Pair Hi-Lift gloves, hardware & gear bag.	ORK	$59.50
	Off-Road Base -- Increase your support surface area and make the original power tool even more versatile! Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground. Convenient to use, easy to store. Rugged construction meets Hi-Lift Jack specifications for strength & durability. Can be used with ANY model of Hi-Lift Jack.	ORB	$34.50
	Fix-It Kit -- Keep your Hi-Lift Jack operating trouble-free. The Fix-It-Kit has the principle parts for servicing all Hi-Lift Jack lifting units. Kit Includes 2 Climbing Pins, 2 Climbing Pin Springs, 2 Cross Pins, 1 Shear Bolt & Nut, 1 tube of jack lubricant	FK-1	$14.00
	Adjustable Tube Mount 1"-2" diameter -- Mount your Hi-Lift Jack to tube bumpers, bull bars, roll cages or roof racks. Manufactured of 6061-T6 structural aluminum with stainless steel hardware. No drilling required.	TM-700	$48.00
	Adjustable Tube Mount 2"-3" diameter -- Mount your Hi-Lift Jack to tube bumpers, bull bars, roll cages or roof racks. Manufactured of 6061-T6 structural aluminum with stainless steel hardware. No drilling required	TM-750	$59.00
	4XRAC Mounting System -- Before You Go Off-Road – Secure your Jack. The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location. Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.1/8" steel construction holds up under the strain of off-road travel A padlock can be placed through a hole in the carriage bolt. All mounting hardware and instructions are included (some drilling required) Mounting brackets are slotted for adjustment. Velcro handle strap secures handle to jack bar.	4X400	$29.00
	Loc-Rac Mounting System -- Conveniently mount and lock your Hi-Lift Jack to the bedrail of your pickup. Installation is simple. It can be mounted horizontally or vertically, with or without a Jack Protector. Your Hi-Lift Jack is mounted in an easy to reach location and is locked to deter theft. Designed to fit the bedrail of most pickups. Each kit contains 2 mounting brackets, a padlock, and all necessary mounting hardware.	LR-200	$22.50
	Bumper Lift -- Equip your Jack to lift curved bumpers. The The Hi-Lift Bumper Lift is designed to fit most steel curved bumpers, for quick and easy lifting. The Bumper Lift has a 3,000lb (1361 kg) capacity. When used with the Hi-Lift Jack — which is not itself designed to be used on curved bumpers — the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task. Never attempt to lift more than one wheel at a time.	BL-250	$23.00
	Jack Protector -- Hi-Lift Jack Protector protects your Hi-Lift Jack from weather, mud, dirt and sand. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant. Fits 36", 42", 48" and 60" Hi-Lift Jacks. Note: All working parts of the 60" jack are protected. However, the foot piece and 5" of steel bar are exposed. The Jack Protector WILL work with the 4XRAC and the LOC-RAC. (user will have to place holes in protector) Soft case easily stores. Draw string closure.	JP-350	$25.00
	Neoprene Jack Cover -- Keep your Hi-Lift Jack's lifting assembly protected from mud, dirt and road grime. This product is designed to greatly reduce the amount of dirt and mud that can accumulate in the working mechanism of the jack. It will NOT eliminate ALL moisture or dirt. Easy On, Easy Off Tight Fit Fast Drying & Machine Washable UV Protected	NJC	$21.00
	Handle Keeper -- Eliminate Jack "Rattling" during transportation and storage. The rugged polyurethane Handle-Keeper holds the Hi-Lift® handle to the upright steel bar, keeping it in place when not in use and eliminating "rattling" during transportation and storage. The Handle-Keeper easily slips on and off over the Hi-Lift® Top Clamp-Clevis to allow for proper use of the Hi-Lift® Jack. The unique design eliminates the need to remove the Top Clamp-Clevis for putting on or taking off the Handle-Keeper. *NOTICE: IT IS VERY IMPORTANT FOR THE HANDLE-KEEPER TO BE REMOVED DURING JACK USE TO ALLOW THE HANDLE TO BE PLACED IN THE FULL UPRIGHT POSITION AS STATED IN THE HI-LIFT SAFETY INSTRUCTION MANUAL. Fits all models of Hi-Lift® brand jacks and is available in two colors - Black & Red	HK-B HK-R	$10.75

The Slide-N-Lock Tie-Down System is the ultimate way to secure any type of payload. Use Slide-N-Lock load restraint for Trucks, Trailers, Jeeps, SUV's, and more! Slide-N-Lock increases tie-down versatility with easy-to-use, moveable locking points. The rust-free design ensures an attractive appearance in any vehicle.

This versatile tie-down system is incredibly simple and effective. With self-locating holes placed every 5 inches, you can position the tie points where you need them in seconds. Simply pulling the spring-loaded locking pin allows you to slide the tie point smoothly and easily to the specific locating hole you want.

The rugged strength of Slide-N-Lock assures you of a tie-down system capable of securing extremely heavy loads. Slide-N-Lock installs in minutes using 1/4" diameter bolts spread approximately every 10 inches in pre-drilled holes.

Each set includes: 2 Anodized Aluminum Rails, 4 Stainless-Steel Locking Slides, and Mounting Hardware.

Available in 22", 68", & 93" lengths to fit any situation in your choice of black or silver finish.

Slide-N-Lock Tie Down System	Part #	Price
93" Silver Anodized	BXR93S	$114
93" Black Anodized	BXR93B	$114
68" Silver Anodized	BXR68S	$105
68" Black Anodized	BXR68B	$105
Slide-N-Lock Tie Down System Shot Rails	Part #	Price
22" Silver Anodized	SWR22S	$46.25
22" Black Anodized	SWR22B	$46.25
Extra Slides	Part #	Price
Stainless Steel Pair	SS-2	$25.25

HI-LIFT JACK

Hi-Lift Jack Accessories