|
| |
RE1801 - Slip
Yoke Eliminator Kit NP231 (Pre 1996 Wranglers & Cherokees)
Stock Jeeps have a slip yoke style output shaft at the rear driveline.
This design is not conducive to off road use nor the steeper operating
angles caused by suspension lifts. To ensure smooth and durable
driveline operation, convert to a fixed yoke output and install a CV
driveshaft. A must on all lifts over 3.5". This kit requires
the modification of your stock output shaft. Drill and tap included for
easy installation. Drive flange is machined from solid Stainless Steel
for extreme strength and corrosion resistance. You can run the RE1801
(not shown) on your NP207 with the spacer kit listed below.
Call
for special pricing on
Rubicon Express
| |
Part
# |
Price |
| Slip Yoke Eliminator
Kit NP231, NP242 |
RE1801 |
$190 |
| Slip Yoke Eliminator
Bearing Spacer for NP207 (not shown) |
RE1802 |
$18 |
|
RE1807 - Slip Yoke Eliminator Kit for 96
& up TJ Wranglers and XJ Cherokees (NP231, NP242)
Stock Jeeps have a slip yoke style output shaft at the rear
driveline. This design is not conducive to off road use nor the steeper
operating angles caused by suspension lifts. To ensure smooth and
durable driveline operation, convert to a fixed yoke output and install
a CV driveshaft. A must on all lifts over 3.5". This kit requires
the modification of your stock output shaft. Drill and tap included for
easy installation. Drive flange is machined from solid Stainless Steel
for extreme strength and corrosion resistance.
Call
for special pricing on
Rubicon Express
| |
Part
# |
Price |
| Slip Yoke Eliminator
Kit NP231, NP242 CV |
RE1807 |
$99 |
|
RE1811 HD
Slip Yoke Eliminator Kit for NP231
Stock Jeeps have a slip yoke style output shaft at the rear driveline.
This design is not conducive to off road use nor the steeper operating
angles caused by suspension lifts. To ensure smooth and durable
driveline operation, convert to a fixed yoke output and install a CV
driveshaft. A must on all lifts over 3.5". This kit includes a new
output shaft that is larger than the stock unit for extra durability. No
core required.
Call
for special pricing on
Rubicon Express
| |
Part
# |
Price |
| HD Slip Yoke
Eliminator Kit for NP231 |
RE1811 |
$299 |
|
RE1811
|
|
CVF Driveshaft
Spicer driveshafts and components are as good as they get. This driveshaft
is compatible with the RE1807, RE1801 slip yoke eliminator kits, and
Currie Enterprises tail shaft conversion kits. Measurements are taken from
flange face to center of the rear u-joint with the slip stub at the center
of its travel. Measure your vehicle on the ground in the running position
to get correct length.
RE1898
Call for special pricing on
Rubicon Express
| |
Part
# |
Price |
CVF
Driveshaft Rubicon Direct Fit
specify 16.5, 17.5, 25.5 or 26.5" |
RE1895 |
$450 |
| CVF
Driveshaft |
RE1898 |
$309 |
|
CVO
Driveshaft
Spicer driveshafts and components are as good as they get. This
driveshaft is compatible with the RE1811 slip yoke eliminator kit, Atlas
transfer cases and any other 1310 series CV yoke. Measurements are taken
center to center on the u-joint with the slip stub at the center of its
travel. Measure your vehicle on the ground in the running position to
get correct length.
RE1860
Call for special pricing
on
Rubicon Express
| |
Part
# |
Price |
CVO
Driveshaft for Rubicon 1300 pinion yoke (Requires RE1809
rear CV yoke)
specify 15.5, 16.5, 24.5, 25.5, 26.5" |
RE1861 |
$309 |
| CVO
Driveshaft Universal |
RE1860 |
$309 |
|
RE1822 - Long Slip Yoke XJ
NP231
Extended Cherokee slip yoke adds 5/8" of length and, most
importantly, sufficient operating angle to avoid driveshaft bind on
lifted vehicles. A must for any lifted Cherokee where a CV driveshaft
kit is not utilized. An easy install.
Call
for special pricing on
Rubicon Express
| |
Part
# |
Price |
| Long Slip
Yoke XJ NP231 |
RE1822 |
$75 |
|
RE1899
Standard Driveshaft
Standard Spicer driveshafts feature a long travel slip stub and yoke.
These are non CV shafts and have two 1310 style u-joints. Measurements
are center to center with shaft at mid stroke.
Call
for special pricing on
Rubicon Express
| |
Part
# |
Price |
| Standard
Driveshaft |
RE1899 |
$239 |
|
|
JK Driveshaft Components
| |
Part
# |
Price |
| JK Front
1310 CVO Driveshaft |
RE1883-365 |
$349 |
| JK Rear
1310 CVF 2 Door |
RE1887-240 |
$349 |
| JK Rear
1310 CVF 4 Door |
RE1887-430 |
$349 |
| JK Rear
T-Case Flange Adapter |
RE1805 |
$67 |
| JK Front
T-Case Yoke |
RE1810 |
$74.95 |
|
Call
for special pricing on
Rubicon Express
PHOTOS AND INFO ON JK
DRIVESHAFT COMPONENTS COMING SOON!
|
|
