Custom designed to work with VIAIR Compressors. They each come with a Pressure Switch with Built-in Relay, an illuminated dash panel gauge with built-in ON/OFF switch, 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for convenient onboard air setup.

This is the same gauge used in our onboard air hookup kits. This gauge is for those who already have an onboard air setup, but wish to upgrade with a well-designed, high quality 150 PSI pressure monitor with built-in ON/OFF switch to activate of deactivate compressors as needed. Included is an angled mounting bracket for easy viewing and 20 ft. of positive extension connectors, and a strip of continuous grommet.

1/8" NPT male port fitting included.
Tolerance is ± 5% of specified pressures.
For 12- and 24-Volt systems up to 20 amps

Moisture resistant and tested to last over 10,000 cycles. They measure 4.25"L x 2.25"W x 2.25H and come with 1/8" male port fitting. Leads are pre-fitted with insulated 1/4" male push-to-connect terminals that are clearly marked. * For 12-Volt systems only - up to 40 amps

Sealed for moisture resistance and comes with 1/8" NPT male port fitting.