Ultra Light Duty Part #10000
Duty Cycle: 10% @ 100 PSI
Max working pressure: 130 PSI
Max Amp Draw: 12 Amps

Parts Included:
1) 1.0 Gallon Viair Air Tank
(1) 98C model Viair Air Compressor
(1) Omega Bracket w/ Mounting Hardware
(1) Accessory Airline
(1) Pressure Switch (85 PSI on, 105 PSI off)
(1) 40 - Amp Relay
(2) T-Fittings
(1) 1/4" Drain Cock
(1) 1/4" Compression Fitting
(1) 1/4" Male NPT Plug
(1) 145 PSI Saftey Valve
(2) 1/4" Male NTP to 1/8" Female BSP
(1) 20 ft. 12-Gauge Wire
(1) Inline Fuse Holder
(1) Electrical Connections

10000 Ultra-Light Duty Onboard Air System can be used to pressurize the included one gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provided reliable smaller volume, 105 PSI air source, in a cost effective package.

Quarter Duty Part #10002
Duty Cycle: 25% @ 100 PSI
Max working pressure: 150 PSI
Max Amp Draw: 18 Amps

Parts Included:
(1) 2.0 Gallon Viair Air Tank
(1) 275C model Viair Air Compressor
(1) Accessory Airline
(1) Pressure Switch (90 PSI on, 120 PSI off)
(1) 40 - Amp Relay
(1) 1/4" Drain Cock
(1) 1/4" Compression Fitting
(1) 145 PSI Saftey Valve
(1) 20 ft. 12-Gauge Wire
(1) Inline Fuse Holder
(1) Electrical Connections

10002 Quarter Duty Onboard Air System is a smaller, 120 PSI onboard air system, suitable for many pneumatic needs, including smaller inflation tasks (not including the inflation of automotive tires), air horns and more. The 25% Duty Cycle Onboard Air System will provide enough service time to operate for about 10 minutes of continued use, providing you give the system 30 minutes to cool down afterwards.

Medium Duty Part #10003
Duty Cycle: 33% @ 100 PSI
Max working pressure: 150 PSI
Max Amp Draw: 19 Amps

Parts Included:
(1) 2.5 Gallon Viair Air Tank
(1) 325C model Viair Air Compressor
(1) 1/4" NPT Quick Connect Coupler (M)
(1) Dash Panel Gauge with ON/OFF Switch
(1) Pressure Switch with Relay (110 PSI on, 150 PSI off)
(1) Reducer (1/8" NPT F to 1/4" NPT M)
(1) 1/4" NPT 175 PSI Safety Valve
(1) 1/4" Drain Cock
(1) 1/4" NPT Compression Fittings
(1) 4-inch Strip of Continuous Grommet Material
(1) 20ft. 12 Gauge Wire with Inline Fuse Holder

Heavy Duty Part #10005
Duty Cycle: 33% @ 100 PSI
Max working pressure: 150 PSI
Max Amp Draw: 26 Amps

Parts Included:
(1) 2.5 Gallon Viair Air Tank
(1) 400C model Viair Air Compressor
(1) 35ft. Coil Hose
(1) 1/4" Quick Connect Stud (F)
(1) 1/4" NPT Quick Connect Coupler (F)
(1) Dash Panel Gauge with ON/OFF Switch
(1) Pressure Switch with Relay (110 PSI on, 150 PSI off)
(1) Reducer (1/8" NPT F to 1/4" NPT M)
(1) 1/4" NPT 175 PSI Safety Valve
(1) 1/4" Drain Cock
(3) 1/4" NPT Compression Fittings
(1) 4-inch Strip of Continuous Grommet Material
(1) 20ft. 12 Gauge Wire with Inline Fuse Holder

By ordering a single part number, you can take all of the guess-work out of getting all of the parts you'll need to install one of the most sophisticated, all-inclusive onboard air systems available today. The Heavy Duty Onboard Air System comes complete with a super fast 400C, 33% Duty Cycle compressor at its heart that will fill the supplied 2.5 gallon tank from 110-150 PSI in approximately 45 seconds. Included is everything you'll need to add a reliable air source to your vehicle as well as inflate tires with the included clip-on air chuck. (For vehicles with up to 35" tires)

Constant Duty Part #10007
Duty Cycle: 100% @ 100 PSI
Max working pressure: 150 PSI
Max Amp Draw: 19 Amps

Parts Included:
(1) 2.5 Gallon Viair Air Tank
(1) 450C model Viair Air Compressor
(1) 35ft. Coil Hose
(1) 1/4" Quick Connect Stud (F)
(1) 1/4" NPT Quick Connect Coupler (F)
(1) Dash Panel Gauge with ON/OFF Switch
(1) Pressure Switch with Relay (110 PSI on, 150 PSI off)
(1) Reducer (1/8" NPT F to 1/4" NPT M)
(1) 1/4" NPT 175 PSI Safety Valve
(1) 1/4" Drain Cock
(3) 1/4" NPT Compression Fittings
(1) 4-inch Strip of Continuous Grommet Material
(1) 20ft. 12 Gauge Wire with Inline Fuse Holder

Super Duty Part #10008
Duty Cycle: 33% @ 100 PSI
Max working pressure: 150 PSI
Max Amp Draw: 35 Amps

Parts Included:
(1) 2.5 Gallon Viair Air Tank
(1) 450C model Viair Air Compressor
(1) 35ft. Coil Hose
(1) 1/4" Quick Connect Stud (F)
(1) 1/4" NPT Quick Connect Coupler (F)
(1) Dash Panel Gauge with ON/OFF Switch
(1) Pressure Switch with Relay (110 PSI on, 150 PSI off)
(1) Reducer (1/8" NPT F to 1/4" NPT M)
(1) 1/4" NPT 175 PSI Safety Valve
(1) 1/4" Drain Cock
(3) 1/4" NPT Compression Fittings
(1) 4-inch Strip of Continuous Grommet Material
(1) 20ft. 12 Gauge Wire with Inline Fuse Holder

X'treme Duty Part #10009
Duty Cycle: 100% @ 100 PSI
Max working pressure: 150 PSI
Max Amp Draw: 29 Amps

Parts Included:
2.0 Gallon Viair Air Tank
(2) 350C VIAIR Compressors
30ft. Coil Hose
Tire Inflation Gun with 200 PSI Gauge
0-150 PSI Pressure Regulator
Blow Gun
1/4" NPT Quick Connect Coupler (F)
Dash Panel Gauge with ON/OFF Switch
Pressure Switch (110 PSI on, 150 PSI off)
(2) 40-amp Relays
Inline Fuse Holder w/ Fuse
1/4" NPT 175 PSI Safety Valve
1/4" Drain Cock
(2) 1/8" BSP to 1/4" NPT (Air Locker Use)
(5) 1/4" NPT Compression Fittings
4-inch Strip of Continuous Grommet Material
20ft. 12 Gauge Wire with Inline Fuse Holder
(2) T-Fitting (1/4"(M) x 1/4"(F) x 1/8"(F))
Electrical Connections

VIAIR’s new X'treme Duty Onboard Air Systems (100% Duty Cycle, 2.68 CFM) make locating and installing all of the parts needed to make installing an onboard air system simple and efficient by including everything you need in one box. With dual compressors, the refresh rate of the tank is lightning fast and enough flow is available to run air tools on demand.

X'treme Duty Onboard Air Systems come with added value tools such as a tire inflation gun, a 200 PSI inline pressure regulator (for air lockers) and a versatile blow gun. Air up tires on the trail with ease or perform roadside repairs yourself using air tools.
(For vehicles with up to 37" tires)

Ultra Duty Part #20001
Duty Cycle: 100% @ 100 PSI
Max working pressure: 150 PSI
Max Amp Draw: 29 Amps

Parts Included:
(1) 2.5 Gallon 200 PSI Viair Air Tank
(1) 480C Chrome 200 PSI Viair Air Compressor
(1) 30ft. Coil Hose
(1) 1/4" Quick Connect Stud (M)
(1) 1/4" NPT Quick Connect Coupler (M)
(1) Dash Panel Gauge with ON/OFF Switch
(1) Pressure Switch with Relay (165 PSI on, 200 PSI off)
(1) Reducer (1/8" NPT F to 1/4" NPT M)
(1) Reducer (3/8" NPT F to 1/4" NPT M)
(1) 1/4" NPT 250 PSI Safety Valve
(1) 1/4" Drain Cock
(3) 1/4" NPT Compression Fittings
(1) 4-inch Strip of Continuous Grommet Material
(1) 20ft. 12 Gauge Wire with Inline Fuse Holder
(1) Accessory Airline

Introducing the world’s first 200 PSI onboard air system meant to save you time & money. Just like all of the VIAIR Onboard Air Systems, you can easily take the guesswork out of getting all of the parts you'll need to install an all-inclusive onboard air system. The VIAIR Ultra Duty 200 PSI Onboard Air System comes complete with a 480C compressor rated to 200 PSI maximum working pressure. Also standard with the Ultra Duty OBA is a 2.5 gallon air tank that is truly rated to 200 PSI working pressure, as well as every single fitting and electrical part you will need to get your 200 PSI system installed perfectly. All VIAIR Onboard Air Systems come with complete instruction manuals that will have you wondering why you didn’t upgrade to Onboard Air sooner. (For vehicles with 37" tires & larger.)