 |
|
VIAIR ONBOARD AIR COMPRESSORS
Call for Discounted Pricing on Select VIAIR items. |
 |
Ultra Light Duty Onboard Air Compressor Part #10000 can be used to pressurize the included one gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provided reliable smaller volume, 105 PSI air source, in a cost effective package.
|
Duty Cycle: 10% @ 100 PSI Parts Included: |
||||||||||||||||||
 |
Quarter Duty Onboard Air Compressor Part #10002 is a smaller, 120 PSI onboard air system, suitable for many pneumatic needs, including smaller inflation tasks (not including the inflation of automotive tires), air horns and more. The 25% Duty Cycle Onboard Air System will provide enough service time to operate for about 10 minutes of continued use, providing you give the system 30 minutes to cool down afterwards.
|
Duty Cycle: 25% @ 100 PSI Parts Included: |
||||||||||||||||||
 |
Medium Duty Onboard Air Compressor Part #10003 By ordering a single part number, you can take all of the guess-work out of getting all of the parts you'll need to install one of the most sophisticated, all-inclusive onboard air systems available today. The Medium Duty Onboard Air System comes complete with a dependable, low amp draw 325C, 33% Duty Cycle compressor at its heart that will fill the supplied 2.5 gallon tank from 110-150 PSI in approximately one minute. Included is everything you'll need to add a reliable single air source to your vehicle. (For vehicles with up to 33" tires)
|
Duty Cycle: 33% @ 100 PSI Parts Included: |
||||||||||||||||||
 |
Heavy Duty Onboard Air Compressor Part #10005 By ordering a single part number, you can take all of the guess-work out of getting all of the parts you'll need to install one of the most sophisticated, all-inclusive onboard air systems available today. The Heavy Duty System comes complete with a super fast 400C, 33% Duty Cycle compressor at its heart that will fill the supplied 2.5 gallon tank from 110-150 PSI in approx. 45 seconds. Included is everything you'll need to add a reliable air source to your vehicle as well as inflate tires with the included clip-on air chuck. (For vehicles with up to 35" tires)
|
Duty Cycle: 33% @ 100 PSI Parts Included: |
||||||||||||||||||
| |
Constant Duty Onboard Air Compressor Part #10007 By ordering a single part number, you can take all of the guess-work out of getting all of the parts you'll need to install one of the most sophisticated, all-inclusive onboard air systems available today. The Constant Duty comes complete with a long-running 450C, 100% Duty Cycle compressor at its heart that will fill the supplied 2.5 gallon tank from 110-150 PSI in approximately one minute. Unlike our other systems, the Constant Duty System can operate for longer periods of time without needing to rest. Included is everything you'll need to add a reliable air source to your vehicle as well as inflate tires with the included clip-on air chuck. (For vehicles with up to 37" tires)
|
Duty Cycle: 100% @ 100 PSI Parts Included: |
||||||||||||||||||
 |
Super Duty Onboard Air Compressor Part #10008 (33% Duty Cycle, 3.21 CFM) make locating and installing all of the parts needed to make installing an onboard air system simple and efficient by including everything you need in one box. With dual compressors, the refresh rate of the tank is lightning fast and enough flow is available to run air tools on demand. Super Duty Systems come with added value tools such as a tire inflation gun, a 200 PSI inline pressure regulator (for air lockers) and a versatile blow gun. Air up tires on the trail with ease or perform roadside repairs yourself using air tools. Comes with a 2-gallon (six-port) air tank, pneumatic fittings, pressure switch, electrical relays and parts, wiring, dash panel monitor, all required hardware and detailed instructions for a flawless install. (For vehicles with up to 37-inch tires) | 2.0 Gallon Viair Air Tank (2) 325C VIAIR Compressors 30ft. Coil Hose Tire Inflation Gun with 200 PSI Gauge 0-150 PSI Pressure Regulator Blow Gun 1/4" NPT Quick Connect Coupler (F) Dash Panel Gauge with ON/OFF Switch Pressure Switch (110 PSI on, 150 PSI off) (2) 40-amp Relays Inline Fuse Holder w/ Fuse 1/4" NPT 175 PSI Safety Valve 1/4" Drain Cock (2) 1/8" BSP to 1/4" NPT (Air Locker Use) (5) 1/4" NPT Compression Fittings 4-inch Strip of Continuous Grommet Material 20ft. 12 Gauge Wire with Inline Fuse Holder (2) T-Fitting (1/4"(M) x 1/4"(F) x 1/8"(F)) Electrical Connections |
||||||||||||||||||
| |
X'treme Duty Onboard Air Compressor Part #10009 (100% Duty Cycle, 2.68 CFM) make locating and installing all of the parts needed to make installing an onboard air system simple and efficient by including everything you need in one box. With dual compressors, the refresh rate of the tank is lightning fast and enough flow is available to run air tools on demand. X'treme Duty Systems come with added value tools such as a tire inflation gun, a 200 PSI inline pressure regulator (for air lockers) and a versatile blow gun. Air up tires on the trail with ease or perform roadside repairs yourself using air tools. Comes with a 2-gallon (six-port) air tank, pneumatic fittings, pressure switch, electrical relays and parts, wiring, dash panel monitor, all required hardware and detailed instructions for a flawless install. (For vehicles with up to 37-inch tires) | 2.0 Gallon Viair Air Tank (2) 350C VIAIR Compressors 30ft. Coil Hose Tire Inflation Gun with 200 PSI Gauge 0-150 PSI Pressure Regulator Blow Gun 1/4" NPT Quick Connect Coupler (F) Dash Panel Gauge with ON/OFF Switch Pressure Switch (110 PSI on, 150 PSI off) (2) 40-amp Relays Inline Fuse Holder w/ Fuse 1/4" NPT 175 PSI Safety Valve 1/4" Drain Cock (2) 1/8" BSP to 1/4" NPT (Air Locker Use) (5) 1/4" NPT Compression Fittings 4-inch Strip of Continuous Grommet Material 20ft. 12 Gauge Wire with Inline Fuse Holder (2) T-Fitting (1/4"(M) x 1/4"(F) x 1/8"(F)) Electrical Connections |
||||||||||||||||||
 |
Ultra Duty Onboard Air Compressor Part #20001 Introducing the world’s first 200 PSI onboard air system meant to save you time & money. Just like all of the VIAIR Onboard Air Systems, you can easily take the guesswork out of getting all of the parts you'll need to install an all-inclusive onboard air system. The VIAIR Ultra Duty System comes complete with a 480C compressor rated to 200 PSI maximum working pressure. Also standard with the Ultra Duty OBA is a 2.5 gallon air tank that is truly rated to 200 PSI working pressure, as well as every single fitting and electrical part you will need to get your 200 PSI system installed perfectly. All VIAIR Onboard Air Systems come with complete instruction manuals that will have you wondering why you didn’t upgrade to Onboard Air sooner. (For vehicles with 37" tires & larger.)
|
Duty Cycle: 100% @ 100 PSI Parts Included: |
||||||||||||||||||