Fabtech engineers wasted no time developing some of the most aggressive suspension lift kits for the new Dodge Ram trucks. The 2000-01 systems also include new upper ball joints.

3" & 3.5" use 285/75R tires, 16x8 wheel with 4-5/8" BS
6" & 6.5" use 315/75R16 tires, 16x8 wheel with 4-5/8" BS or 315/70R17 tires, 17x8 wheels with 4-5/8" BS

Spindle: lifted replacement spindle
Performance: coil springs, upper control arms
Ultimate: coil springs, 3" spindles, upper control arms

Stabilizers

94-01 Ram, Fabtech 6.5" Ultimate lift kit, 315/75R16 tires, 16x8 wheels, 4-5/8" back spacing with Fiberglass Fenders

3" Performance System

Ram with 6" Performance System, 315/75R17, 17x8 wheels, 4-5/8" back spacing

K3004  6" Performance Crossmember System

2002-2008 DODGE RAM 1500 2WD

Spindles are constructed of precision laser cut 1/4" steel, CNC machined ball joint tapers and completely MIG welded.

7" Lift Kit: Spindles coils, blocks, u-bolts and shocks are the required parts to lift your truck 7. Keeping in mind the upper control arms are not a requirement to achieve this, the factory ball joint has been known to wear out over time on the 02-05 models. CST has developed a tubular upper control arm which includes the new CST pro-joint. The pro-joint is completely serviceable and should have a lift span of almost triple the length of the factory ball joint. If you have a 06-07 model, a new front brake line must be added to make the 7" kit work without shearing off the factory brake line. All of the other CST parts are 100% compatible from 02-08.Designed to fit 35" tires on 17x8 wide wheels, maximum of 4.75" backspacing. 

Note: CST does not make a coil for the Hemi V8. You must use the CSE-C16-3 3" urethane coil spring spacer on top of the factory coil spring for this application.

4" Lift Kit: Install a set of CST lift spindle uprights & you can achieve leveling out the front end without affecting the stock ride. If you have a 06-07 model, a new front brake line must be added to make the 4" kit work without shearing off the factory brake line. Longer shocks not required. Designed to fit 33" tires on 17x8 wide wheels with maximum of 4-5/8" backspacing.

2003-2008 DODGE RAM 2500 2WD; All 1500/2500 Mega Cab 2wd up to 2008

CST has developed a 6.5" lift kit for your Dodge 2500 or 1500/2500 Mega Cab 2WD pickup. This kit includes a 3.5" lift spindle, stainless steel braided front brake lines, 3" urethane coil spacers, fabricated rear blocks and u-bolts and a pair of CST Performance shocks. Recommended tire size is 305/70/17 on 17x8 wheels with 5" backspace or a combination of comparable height.

03-07 2WD Dodge 2500 with 6.5" CST lift kit

You'll notice a 315/70/17 tire installed on the pictured truck but minor trimming of the front bumper was required. This lift gives you a great factory-like ride with enhanced stability.

3" Rough Country spindles


3" Rough Country coil spring lift kit
Shock boots not included

The remainder of this kit includes front coil springs, front and rear bump stops, front sway bar relocation brackets, a 3" block and u-bolt kit for the rear, and four shocks. It is a 100% bolt-on application, requiring no cutting, no welding, no drilling, and no exhaust modifications to install. This system requires aftermarket wheels with a minimum of 4.5" backspacing.

Trailmaster Leveling Kits include spacers and all necessary hardware.

Daystar Comfort Ride Suspension kits are the perfect choice for a lift that will not only increase vehicle height, but enhance performance. Improve ground clearance, allow for larger tires, utilize most of the stock components and improve the all around on & off road capabilities at an affordable price.

Dodge Bushings

Front Coil Spacer
Available in black only

Lift

Part #

Lift

Part #