| Slip Yoke Eliminator |
Part # |
Price |
| NP231 Slip Yoke Eliminator |
50-7906 |
$245.95 |
| Front Driveshafts |
Part # |
Price |
| CV Driveshaft 87-93 Wrangler YJ |
5078 |
$299.95 |
| CV Driveshaft 94-96 Wrangler YJ |
5077 |
$299.95 |
| CV Driveshaft 97-06 Wrangler TJ |
5075 |
$299.95 |
| CV Driveshaft 04-06 Wrangler TJ Unlimited Non-Rubicon |
5085 |
$299.95 |
| CV Driveshaft 97-02 Wrangler TJ with 4 cyl. & 3-speed Auto transmission |
5080 |
$299.95 |
| CV Driveshaft 00-06 Wrangler TJ with Dana 44 & Manual transmission |
5074 |
$299.95 |
| Extended Driveshaft 07-10 2-Door Wrangler JK |
5096 |
$499.95 |
| Extended Driveshaft 07-10 4-Door Wrangler JK |
5098 |
$499.95 |
| Rear Driveshafts |
Part # |
Price |
| Rear CV Driveshaft 04-06 Wrangler TJ Rubicon |
5088 |
$464.95 |
| Rear CV Driveshaft 04-06 Wrangler TJ Rubicon Unlimited |
5086 |
$464.95 |
| Rear Driveshaft 84-02 Cherokee XJ |
5076 |
$299.95 |
| Rear Driveshaft 07-10 2-Door Wrangler JK |
5097 |
$499.95 |
| Rear Driveshaft 07-10 4-Door Wrangler JK |
5099 |
$499.95 |
| CHEVY/GMC |
Year |
Driveshaft |
Part # |
Price |
| Hummer H2 |
01-05 |
Front CV style driveshaft |
3406 |
$395 |
| Blazer |
73-91 |
1" Front driveshaft spacer for Saginaw or Corporate type shafts |
4310 |
$58 |
| Chevy/GMC Pickup |
73-87 |
1" Front driveshaft spacer for Saginaw or Corporate type shafts |
4310 |
$58 |
| ChevyGMC Pickup |
97-06 |
Front CV style driveshaft for autotrac equipped vehicles |
3287 |
$403 |
| S-10 Blazer, Jimmy ZR-2 |
98-04 |
Rear driveshaft for autotrac equipped vehicles |
3126 |
$649 |
| Suburban |
73-87 |
1" Front driveshaft spacer for Saginaw or Corporate type shafts |
4310 |
$58 |
| Suburban, Tahoe, Yukon |
97-06 |
Front CV style driveshaft for autotrac equipped vehicles |
3287 |
$403 |
| DODGE |
Year |
Driveshaft |
Part # |
Price |
| Pickup, Ramcharger |
69-93 |
1" Front driveshaft spacer for Saginaw or Corporate type shafts |
4310 |
$58 |
| FORD |
Year |
Driveshaft |
Part # |
Price |
| Explorer 4WD |
96-01 |
Front CV style driveshaft |
9636 |
$443 |
| Ranger |
98-05 |
Front CV style driveshaft |
9636 |
$443 |
| Sport Trac |
01-05 |
Front CV style driveshaft |
9636 |
$443 |
| |
Rubicon Express Driveshafts |
Part # |
Price |
|
03-06 Jeep Rubicon Edition Driveshafts. Direct bolt on replacement heavy duty driveshaft featuring a 1350 CV joint. You no longer need to replace the transfer case yoke or use an adapter when replacing your driveshaft after lifting your Rubicon. This driveshaft is featuring 32 degrees of movement at the CV and a 1330 greasable slip yoke at the axle. Made with heavy duty greaseable u-joints and heavy wall tubing for extra strength. Will not void your factory warranty. |
RE1895 |
$450 |
|
CVF driveshaft is compatible with the RE1807, RE1801 slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. Measure your vehicle on the ground in the running position to get correct length. |
RE1898 |
$309 |
|
CVO driveshaft - Spicer driveshafts and components are as good at they get. This driveshaft is compatible with the RE1811 slip yoke eliminator kit, Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint with the slip stub at the center of its travel. Measure your vehicle on the ground in the running position to get correct length. |
RE1860 |
$309 |
| |
Spicer 1310 Series standard driveshaft non-CV |
RE1899 |
|
| |
Prevent driveline vibration after you lift your Wrangler JK with a Dana Spicer 1310 CV style driveshaft. Designed to replace the factory shafts and to be run with Rubicon Express replacement yoke and flange for the transfer case. Built for daily driving and the demands of off roading. Driveshafts are for factory gasoline motors. |
| |
07-09 Wrangler JK 1310 series front driveshaft (requires RE1810) |
RE1883-365 |
$349 |
| |
07-09 Wrangler JK 2-door rear driveshaft (requires RE1805) |
RE1887-240 |
$349 |
| |
07-09 Wrangler JK 4-door rear driveshaft (requires RE1805) |
RE1887-430 |
$349 |
|
07-09 Wrangler JK rear transfer case flange |
RE1805 |
$67.95 |
| |
07-09 Wrangler JK front transfer case yoke |
RE1810 |
$74.95 |
| |
Rubicon Express Slip Yokes |
Part # |
Price |
|
Slip Yoke Long XJ NP231 (84-95) - Extended Cherokee slip yoke adds 5/8" of length and, most importantly, sufficient operating angle to avoid driveshaft bind on lifted vehicles. A must for any lifted Cherokee where a CV driveshaft kit is not utilized. An easy install. |
RE1822 |
$75 |
| |
Stock Jeeps have a slip yoke style output shaft at the rear driveline. This design is not conducive to off road use nor the steeper operating angles caused by suspension lifts. To ensure smooth and durable driveline operation, convert to a fixed yoke output and install a CV driveshaft. This kit requires the modification of your stock output shaft. Drill and tap included for easy installation. Drive flange is machined from solid Stainless Steel for extreme strength and corrosion resistance. |
|
Slip Yoke Eliminator Kit NP231, NP242 Pre 1996 |
RE1801 |
$190 |
| |
Slip Yoke Eliminator Bearing Spacer for NP207 |
RE1802 |
$18 |
|
Slip Yoke Eliminator Kit CV TJ/XJ NP231/NP242 |
RE1807 |
$99 |
| Slip Yoke Eliminator Kit 96+ ZJ NP231/NP242 |
RE1807 |
$99 |
|
Heavy Duty Slip Yoke Eliminator Kit for NP231 - This kit includes a new output shaft that is larger than the stock unit for extra durabiolity. No core required. |
RE1811 |
$299 |