2009-10 4WD FORD F150 SUSPENSION LIFT KITS

2" allows 33x11.50 stock rims
6" allows 37 x 13.50
17 x 9 w/ 5.5" BS
20 x 9 w/ 5.5" BS

Zone's 6" lift kit for the F150 features two main crossmembers that are locked together with a substantial differential skid plate creating a solid sub-frame. Replacement struts are custom valved to handle the increased load of larger tires. The CNC machined steering knuckles ensure proper steering geometry while reducing installation time. The 3 point differential mounting system rotates the front differential to maintain proper drive line and 1/2 shaft angles. The rear is lifted with a 5" block and u-bolt kit for easy installation.

Note: AWD models will require front driveshaft modification.

Winner Top 10 New Off-Road Products From the 2008 SEMA Show

Skyjacker's 4"-6" lift kit for the 2009-10 4WD Ford F150 includes front struts, front steering knuckles, front & rear crossmembers, differential relocation brackets, differential skid plate, front driveshaft spacer, sway bar lowering bracket, front brakelines and e-brake relocation brackets. Kit includes rear add-a-leaf and system includes rear leaf springs. Note this kit goes from 4" to 6" of lift in 1/2" increments for lots of versatility to fit your desired lift height.

4" allows 35x12.5R20 on 9mm wheel with 5" BS
6" allows 37x12.5R20 on 9mm wheel with 5" BS.

Truxxx lift kits are a direct bolt in, simple and easy to install in 2 hours with no modifications to your vehicle so it can be returned to stock. These kits retain the stock ride quality of your truck. Truxxx lift kits are made in the USA out of the finest steel and we supply you with complete instructions including install pictures, alignment specs and dedicated technical support.

Tire/Wheel: 
325/65R18 or 35/1350R18 on 18x9 with 5" BS OR
35/1350R20 on 20x9 with 5" BS

Fabtech 6" lift kit for the F150 Supercrew 5.4L - Constructed of 1/ 4” thick steel, Fabtech's signature arched lower control arm crossmembers and integrated differential skid plate provide strength and rigidity to the front frame and suspension. Crossmembers include adjustable eccentric cams for easy front end alignment and ability to hold alignment under offroad conditions. Fabtech's proprietary steering knuckles are built with the finest American made ductile iron and will allow use of 18" or 20” diameter wheel. Also included are sway bar brackets, impact struts, brake line extensions, 5" blocks and u-bolts with integrated bump stops. Fabtech offers two 6” Systems including a Basic system that utilizes a spacer with the factory Coilover shock or the Performance system that features the Dirt Logic 2.50 Coilover shocks for outstanding damping capacity.

Installs in 5 hours with no drilling, welding or driveshaft modifications required.

Now thru August 31, 2010 save from $400 to $500 on the purchase of a Rancho lift kit and shocks.

Click here for details.

Rancho's suspension lift kit for the 2009-10 4WD Ford F150  offers some of the finest engineering and highest quality product at a great price. Will not affect the AdvanceTrac with RSC. One-piece reinforced subframe made from high strength low alloy steel. Maintains factory location of rack & pinion and uses OE tie rod ends. CNC machined extended steering knuckles. Does not change track width.

2009 4WD F150 8" Rize lift kit: The Front Lift System consists of 1/4" steel bracketry that is modeled in 3D CAD then CNC cut and formed into a boxed and gusseted configuration, then welded at strategic points to maximize strength. Front retains factory coil over assembly using strut extensions.,

Rise has designed a unique "Linear Slide Rack Support" system that helps isolate and remove the stress loads from the rack & pinion. This system allows the steering point on the spindle to remain in the stock location, thereby creating a factory type steering feel. Along with the Rize quad link support struts and integrated skid plate, Rize Industries drop down bracketry is both stronger and more visually appealing than that of the competition.

Combining all this with special bracketry to use the stock coil-overs, or an upgrade to optional aftermarket coil-overs, what you end up is simply the finest F150 Front Lift Kit on the market, PERIOD, END OF STORY!

8" allows 37x13.50 tires on 9" - 10" wheels with 4-5/8" BS