2&4WD NISSAN TITAN SUSPENSION LIFT KITS

Fabtech's 6" Basic lift kit features extended length steering knuckles and arched crossmembers for excellent on and offroad performance. Lift is accomplished via a steel coilover shock spacer system retaining the stock ride. The rack and pinion steering does not need to be relocated for installation. System includes a 1/4" thick differential skid plate, impact struts and more.

Fabtech's 6" Performance lift kit includes Dirt Logic 2.5 Coilover shocks, providing incredible suspension dampening capacity for offroad use with a good highway ride. High arched lower control arm crossmembers with extended length cast steering knuckles provides superior strength and longevity. The lower control arm crossmembers also utilize eccentric cams for easy alignment and the factory rack and pinion steering does not need to be relocated for installation. System includes a 1/4" thick differential skid plate, sway bar links, impact struts and more.

Allows 315/70R 17 tires, 17x8 wheels, 5" BS with minor trimming. Available in black only.

Truxxx lift kit for Nissan Titan is 100% made in the USA with 1/4" steel construction, laser cut and welded to precision tolerances. Each 2" kit contains two strut mounts (including studs and nuts), rear block & u-bolts, full color instructions and complete alignment specs. Increases ground clearance over traditional bracket type lift kits even without the use of larger wheels and tires. 

The Truxxx lift kit does not change preload and maintains the stock smooth ride. Other kits get their lift from increasing preload on the spring. This means that the ride is harsher and less compliant. No disassembly of strut required for installation. No after installation maintenance required. 

702070 Features: This lift kit was developed to overcome a chronic problem on the Nissan Titan. It includes new upper and lower bump stops, as well as the bracketry to mount the upper bump stop. No drilling or cutting is required.

These bump stops can be used with any lift kit, and are effective at reducing the harsh noise when the suspension reaches full travel in either direction. 

2004-08 NISSAN TITAN 2WD 4" LIFT KIT:  These spindles will help retain the factory ride while providing clearance  for 305/70/17 tires w/ 17x8 wheels (max 4.75" backspace).  Front brake lines are included. The truck will sit level but if you prefer the back to sit a little higher a 1" lift block and u-bolt kit are available.  New rear shocks are also available for use with or without the rear block. Spindles are constructed of precision laser cut 1/4" steel, CNC machined ball joint tapers and completely MIG welded. Can be put back to stock.  

2004-08 NISSAN TITAN 2WD 8" LIFT KIT: Features front subframe, uniball upper control arms w/uniballs installed, front brake lines, high misalignment spacers, lift spindle uprights, front coil over drop spacers, hardware, carrier bearing spacer, bump and droop stop mounts, blocks and u-bolts. Longer rear shocks required & sold separately. This kit has a great factory-like ride and will keep you rollin down the road for years to come. Can be put back to stock. Allows 35x12.50/17 on 17x8 wheels with 5" BS. 

2004-08 NISSAN TITAN 4WD 7" LIFT KIT: CST offers a 7" lift kit which will accommodate 315/70/17 tires on 17x8 wheels with 5" backspacing. This kit uses a 1-piece subframe to drop down the factory lower control arm with an extended spindle knuckle, leaving your factory upper control arm in the stock position. For the coil over, we provide a drop spacer. Extended brake lines included. This lift will keep your wheels within factory width and have a great factory-like ride. Can be put back to stock. Driveshaft recommended.

Note: Order CSS-N28-1 carrier bearingdrop brackets for models with 2-piece driveline .

TrailMaster 6" Nissan Titan Lift Kit provides increased ground clearance for improved off-road performance. Retains OE steering geometry. Easy to install: approximately 4 to 6 hours installation time.

Rough Country’s 6” suspension lift kit for the Nissan Titan is an all- inclusive kit with lifted CNC knuckles, front and rear cross-members, upper strut spacers, sway bar links, sway bar spacer brackets, kicker braces, bump stop brackets, durable differential skid plate and cam bolts with rear block kit, brake line bracket and e-brake relocation bracket and performance Nitro shocks. 

This kit offers increased ground clearance and improved off-road performance while maintaining proper CV alignment. This kit also features welded precision cut cross-members constructed using 1/4” thick steel and 100% laser cut materials developed using the latest in computer aided design to guarantee accurate fit and superior strength

Rancho's 4" Titan lift kit starts with heavy duty extended cast iron steering knuckles which maintain optimal steering geometry and allow for precision alignment. Steering integrity is maintained by preserving factory rack and pinion location. Combined, these features improve handling and eliminate bump steer.

The new system features a two-piece cross member design to precisely relocate the lower control arms. Custom-designed aft braces add superior strength and stability to the suspension. The positioning of the differential is calibrated to correct both CV and drivetrain angles, ensuring a vibration-free ride while protecting OE components against premature wear. No drivetrain or exhaust modifications are necessary, making this a complete bolt-on solution. Rear height is set to the perfect level with spacer blocks. Extended sway bar end links and brake lines round out a list of easy-to-install features.

This system allows for the reuse of the stock wheels and accommodates 35x12.50R18 tires,
 18x9 wheels with 6.0" BS.

Premium Lift Systems offer an affordable lift solution. Combining Performance Accessories' body lift kit, leveling kit and gap guards, Premium Lift Systems are the most economical way to raise your vehicle between 5" to 6" allowing a 35" tire. Premium quality and appearance without the premium price tag!