Home Photo Gallery Customer Service View Cart Order Status
Suspension Lift Kits
Leveling Kits
Sales & Specials
 
ATV / UTV
Add-a-leafs
Air Compressors
Bed Rail Caps
Blocks & U-Bolts
Body Lift Kits
Brake Lines
Bump Stops
Bumpers
Bushings (poly)
Coil Springs
Differential Protectors
Drive Shafts
Exterior (Steel
Fender Flares
Grill Guards
Handles
Helper Springs (leaf & coil)
Hi-Lift Jack
Jeep Stuff
Ladder/Traction Bars
Leaf Springs
Lights
Limiting Straps
Nerf Bars
Performance Parts
Prerunner
Seats & Seat Covers, Restraints
Shackles
Shocks
Skid Plates
Slip Yoke
Steps (Nerf/Side)
Stabilizers
Storage Bags (Tools, maps, toys, etc.)
Straps (Tie Down, Ratchet)
Superchips
Sway Bar Links/Disconnects
Tailgate Caps
Tire Carrier
Traction Bars
TruSpeed Speed Sensor
U-Bolts
Videos
Winches


99-08 Toyota Tundra Suspension Lift Kits

Daystar Fabtech RCD Revtek Rough Country
Skyjacker Superlift TrailMaster Tuff Country

Click part numbers to see lowest price in cart!

Revtek Industries sets the standard for 2.5" to 3" suspension lift systems for Toyota vehicles. The lift is designed to deliver excellent on and off road performance. All materials used in the lift system are made of original equipment specified material.

  • Works with manual or automatic hubs.
  • Split spacer design
  • Does not lengthen strut thus lower control arm isn't rotated and OE geometry is maintained 
  • Permits up to 33/12.50 or 285/75/R16 with minor wheel well trim. Maximum recommended wheel size 15x8 or 16x8 medium off-set
  • Maintains standard Toyota OEM geometry.
  • No cutting or welding necessary
  • No modification of original steering components necessary.
  • Additional preload on front spring results in superior ride quality
  • Does not require replacement shocks
  • Easy, low cost installation (1-3 hours)
  • Limited Lifetime Warranty for material defects.


2000-06 Tundra with 2.5" Revtek lift kit


07 Tundra with 2.5" Revtek lift kit

RV_TndraKit.jpg (29080 bytes)
Tundra 2.5" components

00-06 4WD Tundra - Longer shocks not required. Part # Price
2.5" Complete kit. 435 $439
2.5" Front only 435F $290
Differential drop spacer kit for 00-06 4WD Tundra RTDD1-KB $21
00-06 2WD Tundra - Longer shocks not required Part # Price
2.5" Complete kit 436 $439
2.5" Front only 436F $290
07-08 4WD Tundra - Longer shocks not required Part # Price
2.5" Complete kit 437 $375
2.5" Front only 437F $208
07-08 2WD Tundra - Longer shocks not required Part # Price
2.5" Complete kit 438 $375
2.5" Front only 438F $208

Back to Top

The TrailMaster 2" Tundra lift uses 2" steel rings with integrated bolts encapsulated in polyurethane for durable, squeak-free performance. Easy to install.

Trailmaster's 5.5" lift combines the 2.5" billet spacer lift with the 3" body lift. 

TM_T4502.jpg (15722 bytes)
T4502 - click to enlarge

T4607.jpg (28275 bytes)
T4607 - click to enlarge


2" TrailMaster Leveling Kit


TL220
99-07 2&4WD Tundra Part # Price
5.5" 07 Tundra spacer & body lift combo T4607

$934

2.5" 07 Tundra Billet spacer leveling kit T4502

$343

2.5" 07 Tundra Billet spacer leveling kit, front only TL223

$237

06 Tundra poly spacer leveling kit TL222

$141

2" 99-03 Tundra spacer leveling kit TL220

$110

Back to Top

5" Tundra components

  • Heavy duty replacement spindles

  • Upper ball joints & bearings pressed into new spindles

  • Upper coil / strut spacers maintain a near factory ride

  • Front stock struts can be retained

  • One-piece subframe for added strength

  • Designed to install with automatic hubs only.

  • Vehicles without ABS brakes require two of part 54900-13

  • Allows use of 33x12.50 tires

  • Requires wheel change with back spacing no more than 4.5"

  • Longer rear shocks required, sold separately

4.5" Tundra components

  • Upper coil / strut spacers maintain a near factory ride

  • One piece sub-frame increases strength & durability

  • Factory front struts can be retained

  • Upper ball joint spacers include new ball joints

  • Allows 33x12.50 tires

  • Requires new rims with 4.75" back spacing

  • Longer rear shocks required, sold separately


Link to Tuff Country Photos

All fit both 2& 4WD models
Shocks sold separately
Part # Price
2" 99-06 Tundra, front spacers only 52901 $103
2" 2007 Tundra, front spacers only  52070 $115
2.5" 99-06 Tundra Strut Spacers w/ rear lift 52925 $240
2.5" 07-08 Tundra Strut Spacers w/ rear lift 53070 $189
4.5" 99-04 Tundra 55900 $1,335
4.5" 05-06 Tundra 55902 $1,382
5" 99-03 Tundra, Spindles (Auto hubs only) 55905* $1,604
5" 04 Tundra, Spindles (Auto hubs only) 55906* $1,649
5" 05-06 Tundra, Spindles (Auto hubs only) 55907* $1,658
* Vehicles without ABS brakes require quantity two of part 54900-13
ABS Plug for spindles (order 2) 54900-13 $58.20

Back to Top

Skyjacker's 2.5" poly spacer kit for the Tundra includes front coil spacers, poly bump stops and all necessary hardware.

2" Metal spacer kit includes front spacer and all necessary hardware. 

3" Performance Strut Kit 
Skyjacker's 3" kit includes replacement front struts. The 00-06 models include rear add-a-leafs. The 07+ models include rear blocks. Maximum tire/wheel size recommended  is 32/11.50/16. 

07-08 Tundra 4WD  2"-3" Coil Over Kit
Skyjacker has developed a 2" - 3" lift featuring front coil-over shocks with Softride coil springs and all the necessary mounting hardware. This is a high performance Skyjacker suspension kit complete with all the options and ease of a simple bolt-on installation. Rear blocks included. Maximum tire/wheel size recommended  is 32/11.50/16.

07-08 Tundra 4WD 6" Lift Kit contains knuckles, front & rear crossmember, extended brake lines. Available with either rear blocks or new rear leaf springs. Longer rear shocks required and sold separately. 



TTU20MS -- Max Tire 32x11.50 with 3.5" BS



 3" Performance Strut 

SK_TU730Kkit.jpg (30546 bytes)
2-3" Coil Over kit - Click to enlarge

Rear Shocks not included Part # Price
2.5" 00-06 2&4WD Tundra metal leveling kit TTU20MS $124
2.5" 00-06 2&4WD Tundra poly spacer kit TTU25 $247
3" 00-06 2&4WD Tundra Performance Strut Kit TTU30STK $317
2" 07-08 Tundra metal leveling kit TU720MS $159
3" 07-08 Tundra 4WD Performance Strut Lift Kit TU730STK $311
2-3" 07-08 Tundra 4WD Coil Over Kit TU730K $926
6" 07-08 Tundra 4WD Kit with rear blocks TU761PK $1,426
6" 07-08 Tundra 4WD Kit with rear leaf springs TU761PKS $1,907

Back to Top

RCD now offers suspension systems fitting all 1999-2006 2&4WD Tundra trucks. One piece crossmembers maintain structural integrity, correct control arm and CV axle angles. Strength is enhanced by a one-piece differential skid plate. CNC machined cast iron steering knuckles with pre-installed factory Toyota hub bearings provide easy installation along with enhanced alignment characteristics. 

Also included are a new, heavy duty 1" front sway bar (vehicles not equipped with sway bar may require bushings) and Bilstein shocks for precise handling and control; 304 Stainless Steel Anti-compression struts; steel braided extended brake lines; rear block & u-bolt kit and all necessary mounting hardware. The system is ride height adjustable in the front of either 4" or 6" of lift depending on chassis configuration.

03-04 Models may require an additional steering extension. There is no certain production date to determine which 03-04 models require this part but if it is not needed it may be returned for credit. 


C
lears 33x12.50 tires with no trimming at 4" ride height on an 8" wide wheel. Allows 35x12.50 tires on 16x8 wheels with 4" maximum back spacing. Minor trimming may be required.


4"-6" RCD lift kit components

2&4WD 99-06 Tundra
Bilstein shocks included

Part #

Price

0"or 2" Economy Leveling Kit, front red Bilstein adjustable struts 10-47000 $264
0" - 2" Adjustable Threaded body Coilovers 50-BTS-7514 $840
4"-6" 99-8/1/ 03 Tundra 10-47400 $2,461
4"-6" 8/2/03-06 Tundra (Only fits vehicles manufactured after 8/1/2003 with large lower control arm and ball joint) 10-47404* $2,461
Steering Extension possibly required on 03-04 Tundra with 4-6" lift - credit is available if the part is not used 20-70772 $56

Back to Top

The new Tundra lifts are achieved by the use of CNC machined aluminum coil preload rings to increase ride height and firm up the factory spongy ride. These lifts are a cost effective solution that gives the lift needed for larger tires without the stiff price of a full "coil-over" replacement. Allows for 33's on factory 8" wheels with minor wheel well trimming.

2&4WD Tundra  Part #

Price

2" 99-06 Tundra, front only 8000 $162.54
99-06 Tundra 1.5" rear blocks & u-bolts 8016 $141.98
99-06 Tundra single rear shock 85281 $31.96

TruSpeed Speed Sensor


Superlift lift kit

Back to Top 

Rough Country's 99-05 2.5" lift kit includes front polyurethane coil spring isolators & spacers, muffler hanger extension, rear Heckethorn 9000 series shocks, and rear shackles. 

07-08 3" kit includes quality front upper strut extensions designed using the latest computer aided design technology, front differential mounting spacers, front skid plate spacers. No strut disassembly or strut compressor required for installation. 4WD vehicles can use factory skid plate. Allows up to 33" tires.

HK_870.jpg (21329 bytes)
870


2.5" Tundra components
Shock boots not included


Tundra with Rough Country 2.5" lift 285/75R16 

Rear shocks included Part # Price
99-05 2&4WD Tundra 6-lug 2.5" with rear shocks 750S $269
07-08 2&4WD Tundra 6-lug 3" without shocks 870 $129

Back to Top

00-05 Tundra with Basic, Performance Coilover or Dirt Logic 2.5 Coilover allows for 285/75R16 tires, 16x8 wheels, 4-5/8" BS with minor trimming.

2" and 6"  07 Tundra Lifts

Fabtech's 6" Tundra systems feature extended length ductile steering knuckles that have been designed to operate within the factory steering geometry.  This geometry provides proper turning radius with oversized tires and wheels. The factory lower control arms are relocated with high arched 1/4" thick steel crossmembers with an integrated differential skid plate for protection against offroad obstacles. The factory front sway bar is retained and utilizes extended length link ends.  

The Basic system features a heavy duty shock spacer system that retains the stock coilover shocks without disassembly for a factory like ride.  The Performance system includes our Dirt Logic 2.5 Coilover shocks for aggressive offroad use with a good highway ride. Recommended 35/12.50R18 tires w/ 18x9 wheels with 5.5" BS w/ minor trimming or 35/12.50R20 w/ 30x9 wheels with 5.5" BS w/ minor trimming.



07 Tundra with 6" lift



Tundra, 2.5" Performance coil over system with 285/75R 16 tires, 16x8 wheels with 4-5/8" BS with minor trimming.



Fabtech lifts available in black only.

 

Basic: System features Fabtech performance shock with a replacement coil spring and adjustable coil seat for a good highway and offroad ride. Performance Coilover: Core of this coilover is a 2.0" OD take-apart race shock with a fully threaded body, allowing ride height adjustment with a performance coil spring for outstanding offroad damping with a good highway ride. Dirt Logic 2.5 Coilover Shocks: Built for aggressive offroad driving, this coilover features a 2.50" OD take-apart shock with height adjustability coming from the threaded body and performance coil spring. Offroad dampening capacity is so superior with this coilover we caution drivers to not drive past the limits of the stock components of the vehicle.
00-06 2&4WD Tundra 0-2.5" Coilover System
(Order rear shocks separately)
Basic Coilover FTS2400K $528
Performance Coilover FTS2200K $963
2.5 Dirt Logic Coilover FTS2600K $1,125
Rear shocks (order 2) FTS7236 $47
2007 2&4WD Tundra Kits - rear shocks sold separately
2" Lift Spacer Kit 2&4WD  FTS26025BK $161
2" Lift Coilover System 2WD only  FTS26024 $1,260
Standard Rear shocks (order 2) FTS7188 $47
2.25 Dirt Logic Rear shocks (order 2) FTS81061 $251
2.25 Dirt Logic Reservoir Rear shocks - 
2WD ONLY (order 2)
FTS80061 $332
2007 4WD Tundra Kits - rear shocks included
6" Basic w/ Coilover spacers K7009 * $2,105
6" Basic w/ Coilover spacers and rear Dirt Logic shocks K7009D * $2,511
6" Performance W/ Dirt Logic 2.5 Coilovers K7010 $3,180
6" Performance W/ Dirt Logic 2.5 Coilovers and rear Dirt Logic Shocks K7010D $3,587
* 6"  Basic Kit fits CrewMax 5.7L 4wd Auto Trans models only

Back to Top

Daystar Comfort Ride Suspension kits are the perfect choice for a lift that will not only increase vehicle height, but enhance performance. Improve ground clearance, allow for larger tires, utilize most of the stock components and improve the all around on & off road capabilities at an affordable price.


Strut Spacer
Available in black only

Model 2/4WD

Lift

Part #

Price
96-06 Tundra 2/4WD 1" body lift, Replaces Factory Mounts, All in one, No stacking, no spacers KT04510 $185
96-06 Tundra 2/4WD 2.5" Front Strut Spacers, RR Add-a-leaf, Bump Stops & Shock Boots KT09104 $159.95
96-06 Tundra 2/4WD 2.5" Front Strut Spacers  KT09103 $129.95
96-06 Tundra 2/4WD 1" Front Strut Spacers  KT09105 $39.95

 

MISCELLANEOUS
Toyota Bushings
Brake Lines
TruSpeed Speed Sensor

Back to Top


Copyright 2008-2009, Rocky Mountain Suspension Products
For Orders or information, call
1-800-521-4908