2019-22 2&4WD Ram 1500 3.5" UCA SST Lift Kit
Important Notes
Not for use on air-suspension equipped trucks
Also fits Rebel edition
Not for use on trucks that are factory pre-lifted/leveled or that have the "off-road package"
Check factory height prior to ordering /installing. Trucks with more than 22" of wheel hub to fender lip height may require less lift
NOT intended for off-road use or abuse
Note: If running a 35x12.50-20, the minimum wheel offset is 0 offset on a 9" wide wheel. If running a 295/65-20 the minimum is a +18 offset to ensure the tire does not rub the control arm at full turn
Quick Overview
Get a true 3.5" lift for your Ram 1500 with the ReadyLift lift kit featuring DOM tube steel upper control arms that have corrected ball joint angles. The CNC machined Billet aluminum top mount strut extensions and spring pre-load spacers take care of the front lift requirements for your Ram 1500. The rear set up requires an all-new fabricated steel 2" rear coil spring spacer that includes rear bump stop extensions to control compression.
Kit Components
Tubular upper control arms with corrected ball joint cup angles and heavy-duty ball joints
CNC machined billet aluminum top hat spacers
Pre-load spring spacers
Heavy-duty fabricated steel rear coil spring spacers
Fabricated steel rear bump stop landing pads
Kit Features
Made in the USA
Increased ground clearance
More level stance
Fits Rebel edition
- Make: Dodge
- Model: 1500
- Vehicle: 2019-22 Ram 1500 3.5" UCA SST Lift Kit
- 2or4: 4WD
- Tire Size: 35x12.50 20x9 +0
- Initialize: 1
- Vehicle: 2019-22 Ram 1500 3.5" UCA SST Lift Kit
- 2or4: 2WD
- Tire Size: 35x12.50 20x9 +0
- Initialize: 1
- Record Id: 1
ReadyLift lift kits the following models:
2019 Ram 1500
2020 Ram 1500
2021 Ram 1500
2022 Ram 1500