Honda Ridgeline, Pilot, Passport 2" leveling kit with sway bar links

In 2017 Honda made changes to the front suspension on the Ridgeline that include no built-in camber adjustment and the need to move the control arms down to install a lift kit. Traxda has addressed both these issues with their 2" leveling kit. Traxda strut spacers have 2 degrees (+1/-1) of camber adjustment built in (patents pending). This also makes for easier installation.

On the Ridgeline, to prevent the front axles from contacting the bolts that hold the lower control arms, a spacer is included to prevent contact. In addition, the factory sway bar links are replaced with shorter links to prevent the sway bar from contact with the frame at full extension.

Not all 31" tires are the same. Therefore, to avoid rubbing, stay under 31" tall and under 10" wide. Traxda used 265/65-18 (31.6”X10.4”) tires on 18x8 wheels with a +38mm offset that resulted in slight rubbing when backing up or turning left. To avoid rubbing altogether, use 265/65-18 (31.6”X10.4”) with stock wheels (offset +55mm) with slight rubbing that was reduced by trimming the plastic at the rear of the wheel well. Further reduce rubbing by installing a wheel spacer that changes the offset by 16mm.

View kit installation instructions