Honda Ridgeline, Pilot, Passport 1.5"/.5" lift kit with sway bar links

In 2017 Honda made changes to the front suspension on the Ridgeline that removed the built-in camber adjustment and added the need to move the control arms down to install a lift kit. Traxda has addressed both these issues with their 1.5" lift kit. Traxda strut spacers have 2 degrees (+1/-1) of camber adjustment built in (patents pending). This also makes for easier installation. On the Ridgeline, to prevent the front axles from contacting the bolts that hold the lower control arms, a spacer is included to avoid contact. In addition, the factory sway bar links are replaced with shorter links to prevent the sway bar from contact with the frame at full extension.

The rear struts on the Ridgeline come if three different asymmetrical variants with right and left specific versions. The 1.5" rear strut spacers designed by Traxda take all this into consideration and provides a new design that will fit all three variants of the rear strut. Additionally, an innovative split cap design is used to shave at least an hour off rear installation. The strut remains on the vehicle to lift the rear (patents pending).

• Designed to retain the stock ride quality
• Aftermarket shocks are NOT required
• Alignment specs included, CAMBER adjustment built in to Traxda kit!
• MADE IN THE USA!

View kit installation instructions